What does the roller do in your process?
Precision & Process Rollers
The working positions on your line, each made to the tolerance, surface, and compound its job actually demands.
- Precision Rollers Tight-tolerance rollers built for applications where runout, surface finish, and dimensional accuracy matter. Precision Rollers
- Laminating Rollers Designed to hold consistent pressure, temperature, and web contact across the working face. Laminating Rollers
- Coating Rollers Specified for consistent coating, transfer, surface finish, and material compatibility. Coating Rollers
- Calender Rollers Precision geometry and surface finish matched to high-load processes where thickness control matters. Calender Rollers
- Thermal Transfer (Hot & Chill) Built for uniform heat transfer and dimensional stability across the working face. Thermal Transfer (Hot & Chill)
- Nip Rollers Covered and ground for consistent pressure, contact, and traction across the working face. Nip Rollers
- Idler Rollers Made for free-spinning, low-drag performance with consistent web support and reliable tracking. Idler Rollers
- Drive Rollers Cover and finish chosen for reliable traction, grip, and consistent material movement. Drive Rollers
- Squeeze Rollers Controlled pressure for nip and metering. Squeeze Rollers
What is your roller covered or coated with?
Materials & Surface Technologies
The material and surface of a roller directly affect how it interacts with your product and how it performs over time.ABBA matches base materials, coverings, coatings, hardness, and surface finish to the chemistry, temperature, wear, and performance demands of the application.
- Base Roller Core Materials Core material is selected around load, speed, temperature, environment, and dimensional requirements. Base Roller Core Materials
- Rubber Covered Rollers Application-specific compounds formulated for chemistry, temperature, hardness, and wear. Rubber Covered Rollers
- Polyurethane Covered Rollers Cast for high-wear applications where wear resistance and service life matter. Polyurethane Covered Rollers
- Specialty Roller Coverings Specialty coverings developed beyond traditional rubber and polyurethane for unique application requirements. Specialty Roller Coverings
- Plated & Treated Surfaces Plating and surface treatments specified for wear resistance, corrosion protection, and application-specific performance. Plated & Treated Surfaces
- Coatings Surface coatings selected for wear resistance, release, traction, slip, corrosion resistance, and surface performance. Coatings
Can your existing roller be restored?
Recover, Repair & Reconditioning
A new roller is not always the right answer.ABBA evaluates your existing roller to determine the right repair, recover, grinding, or resurfacing process to restore performance, extend service life, and potentially reduce cost and lead time.
- Core Inspection Evaluate structural integrity and dimensional condition through non-destructive testing, crack detection, and precision measurement. Core Inspection
- Roller Repair Journal, bearing surface, bore, core, and dimensional repairs designed to restore the roller base back to specification. Roller Repair
- Roller Recovering Remove the worn covering and recover with a material, durometer, and finish matched to your application. Roller Recovering
- Recoating Remove and replace worn coatings to restore surface properties and performance. Recoating
- Roller Regrinding Remove minor surface damage and restore the finish by regrinding to a reduced, acceptable OD. Roller Regrinding
Recover or Replace?
The right path depends on the condition of the roller and the demands of the application. Our roller evaluation helps determine which makes sense.
Recover When…
The core, journals, and critical features are in serviceable condition and the existing design still fits the application. Recovering can restore performance with the right material, durometer, finish, and geometry while retaining the existing core.
Replace When…
The core is damaged beyond practical repair, critical dimensions can no longer be restored, or the existing design no longer meets the application. ABBA can engineer a new roller around the process requirements.
Behind Every Category
Our Own Engineering.
Our Own Lab.
- Engineering Design, reverse engineering, precision grinding, verification. Explore Engineering
- Fabrication New rollers built core to finish: the path behind every new process roller and cover. Explore Fabrication
- Recover & Repair Recovering, resurfacing, and repair solutions matched to your roller condition, application, and performance requirements. Explore Recover & Repair
- Rubber-Chemistry Lab
- In-House Design
- Precision Grinding
- Inspection Verification
- Approval-Drawing Sign-Off
By the Numbers
Capabilities at a Glance.
| Parameter | ABBA Capability |
|---|---|
| Outside Diameter (OD) | Up to 40″ |
| Length | Up to 300″ overall |
| Weight | Up to 10,000 lbs. (5 Tons) |
| Cylindricity (OD) | To 0.0003″ |
| TIR (Total Indicated Runout) | To 0.0002″ |
| Surface Finish | As low as 0–1 μin Ra, various finishes available. |
| Verification | Every critical tolerance verified before shipment |
| Compounds | 2,000+ proprietary in-house formulations |
| Surface / Coating | Hard chrome, mirror polish, textured, specialty coatings |
| Core / Journal Fabrication | In-house |
| Design | Solidworks, AutoCAD, reverse engineering, approval-drawing sign-off |
| Certification | ISO 9001:2015 |
| Country of Origin | Made in the USA |
| Expedite | Available on request and review |
Working outside these ranges? Tell us what you need. Most of what we do is custom.
FAQ
Products and Capabilities: Common Questions
How do I know which roller I need?
Roller selection starts with the application. Consider the roller’s function in your process, operating conditions, material requirements, and critical specifications. Whether you need a nip, laminating, or coating roller, a specific covering or surface finish, or an existing roller recovered or repaired, we can help determine the right solution.
Not sure where to start? Request a roller evaluation and our engineering team will review your application and recommend the next steps.
Should I recover a roller or buy a new one?
What cover materials do you offer?
What tolerances can you hold?
Do you make custom rollers, or only standard sizes?
Can you reverse-engineer a roller with no drawing?
Ready When You Are
Send Us
the Job.
Have a drawing or a worn roller? Send it and we’ll quote it.Not sure yet? Put our engineer on your roller problem and get a report on what’s wrong and what it’ll take.