The Challenge
Coating Variation, Material Waste & Yield Loss
A global composites manufacturer was experiencing excessive coating material consumption and reduced production yield due to inconsistent coat weight across the web.
Excessive coating in certain areas increased material consumption, while insufficient coating in others resulted in product quality concerns and yield loss. The existing roller design was not adequately matched to the application’s loading and operating conditions, contributing to uneven coating distribution.
The customer needed more than a replacement roller. They needed an engineered solution to improve cross-web coating uniformity, reduce material waste, and extend roller covering life.
Our Engineering Approach
We began by evaluating the coating process, operating conditions, existing roller construction, and performance requirements.
Rather than simply recovering the roller with the original rubber compound, we evaluated the complete roller system, focusing on both the mechanical design of the base roller and the material properties of the rubber covering.
Core Design & Deflection Optimization
We reverse-engineered the existing roller and evaluated its core construction, geometry, loading, stiffness, and deflection characteristics.
The core was redesigned to improve structural stiffness and reduce deflection under operating load. This helped address variations in contact pressure across the working face that contributed to excessive and insufficient coating.
Rubber Compound & Covering Optimization
In parallel with the mechanical redesign, we evaluated the existing rubber covering and its interaction with the coating process.
Material selection considered chemical compatibility, hardness, compression behavior, wear resistance, and operating conditions. We optimized the rubber compound and covering specifications to support consistent coating transfer and improved material wear life.
By addressing both the core construction and rubber covering, we developed an application-specific solution focused on the complete roller system rather than treating the covering as an isolated component.
The Result
Improved Yield & Reduced Material Waste
The redesigned roller addressed two important factors affecting the customer’s coating process: structural deflection and rubber covering performance.
The revised core design and optimized covering helped improve cross-web coating uniformity, reducing excessive material application and areas of insufficient coating.
Key outcomes included:
- Reduced Material Waste: Improved coating uniformity helped reduce excessive coating material consumption.
- Improved Production Yield: More consistent coating distribution reduced areas of insufficient coating and associated quality losses.
- Reduced Roller Deflection: Revised core construction improved structural stiffness and reduced deflection under operating load.
- Improved Covering Performance: An optimized rubber compound was selected to support wear resistance and extended service life.
- Lower Production Costs: Reduced coating material consumption and improved production yield helped lower overall manufacturing costs.