If Your Line Runs on a Roller That Can’t Fail, We Should Talk.

We engineer rollers your line depends on well beyond the industries above, including solar manufacturing and lamination, converting and web handling, food processing, and other precision and continuous-web processes. If a roller is essential to your line and you don’t see your market here, that is a conversation, not a dead end.

Since 1959 Engineered Since 1959
2,000+ Formulations In-House, We Own Them
Inspection TIR to 0.0002″
ISO 9001:2015 Quality Management

What Kills Rollers on a Continuous Line

The Failure Modes Change by Market. The Cost of a Failed Roller Does Not.

A solar laminator, a converting line, a food-processing line, and a sheet extruder ask different things of a roller, but they lose money the same way. The cover wears, swells, cracks, or lets go of the core. The geometry drifts and the nip goes uneven. The finish goes out of spec and prints into the product. Each defect moves down the line one part at a time, and where the roller is the process, a roller problem is a yield problem. When the original vendor is gone, or never engineered the roller for the position in the first place, you are running on a part with no print and no vendor behind it.

The line does not care that its market is not on our list. It cares whether the roller was engineered for the position.

  • Cover Wear
  • Chemical Swell
  • Delamination
  • Runout Drift
  • Finish Out of Spec
  • Web Marking
  • Lost Vendor

The ABBA Standard

We Engineer to the Position, Not to a Part Number.

Solar, converting, food, printing, plastics, building products, metals, wood: we do not start from the market. We start from the position and the process, what the roller touches, how hot it runs, what it has to grip or release, and what a failure costs you. Then we engineer the compound from 2,000+ in-house formulations, the geometry, and the finish to that position, and verify every critical tolerance before it ships.

Most of what we do is custom. If the roller is essential to your line, it is our kind of work.

In-House Material Development
Application Engineering & Review
Reverse Engineering & Design Support
Verified Tolerances
Approval Drawing Sign-Off
Responsive Lead Times & Expedite Options
Request a Roller Evaluation

Also Serving

The Other Lines We Serve.

Each line asks something different of the roller. Find yours, then the roller type that answers it.

FAQs

Additional Industries: Common Questions

Which Industries Do You Serve Beyond the Ones Listed?
Solar manufacturing and lamination, converting and web handling, food processing and FDA applications, printing, plastics, building products, metals, wood, and other precision and continuous-web processes. If a roller is essential to your line and your market is not listed, tell us what the position does and we will tell you whether we are the right fit.
My Market Is Not on Your Site. Is It Worth Asking?
Yes. Most of what we do is custom. We engineer to the position and the process, not to the market, so a roller on a line we have not named is evaluated the same way as any other: what it touches, how it runs, and how it fails. Tell us what’s happening on the line.
Do You Make Food-Grade or FDA-Compliant Rollers?
Yes. We formulate food-grade compounds in our own lab for food-processing applications where the application requires it, engineered to the position without giving up the hardness, release, or wear life the line needs. See Material Development.
Can You Replace a Roller When the Original Vendor Is Gone?
Yes. We reverse-engineer from a worn roller, a spare, photos, or a sketch, with no print required, and produce an approval drawing you sign off on before we build. See Engineering.
What Tolerances Can You Hold?
As tight as 0.0003″ cylindricity, 0.0002″ TIR, and surface finishes as low as 0–1 μin Ra, with every critical tolerance verified before the roller ships.
How Do I Get Started?
Request a roller evaluation. An ABBA engineer reviews the positions in question and gives you a report with picture and dimensional evidence of what is worn and what to do about it.

Roller Evaluation

Put an Engineer on Your Line.

Tell us what’s happening on the line.